Electronic Products Finding & Locating
Hard to Find Electronics
Domestic & Global Electronics Procurement
Domestic & Global Contract Manufacturing
Electronics Global Supplier, Prototyping House, Mass Producer, Custom Manufacturer, Engineering Integrator, Consolidator, Outsourcing and Contract Manufacturing Partner.
We are your one-stop source for electronic components, prototypes, sub-assemblies, assemblies, finished products and supplies.
Choose your LANGUAGE
Wireless & RF & Microwave
Our wireless products are antennas, integrated radio modules and development tools, evaluation systems, connectorized antenna, embedded antennas, specialty antennas, GPS antennas, fixed point antennas, chip antennas, bluetooth modules and devices, bluetooth HCI module, class 2 bluetooth 2.1 + EDR module, class 1 bluetooth 2.1 + EDR module, embedded wireless modules, UHF, VHF transceiver modules and development kits, UHF and VHF telemetry radios, embedded RF wireless products, Zigbee solutions, RFID modules, RFID reader and writer, RF power field effect MOSFETS, freescale Zigbee wireless solutions, Zigbit modules, wireless ethernet bridge, embedded GPS module, long range RF transceiver modules, long range wireless communication modules, low cost RF transmitter modules, RF transmitters and receivers with integrated encoder and decoder chips, digital and analog wireless modules, multi-channel radio frequency modules, USB interface module, remote control and command ICs, OEM products, Wi-Fi modules, wireless microcontrollers, RFID reader ICs, mesh networks, wireless I/O systems, one-way wireless systems, two-way wireless systems with expandable I/O options, wireless device servers, external wireless device server, FHSS, frequency hopping spread spectrum products, short range radios and RFICs, single chip wireless MCU, RF ISM band tool solutions, chipset, IQ modulators, transponders, navigation products.
Wireless components, devices and assemblies for remote sensing, remote control and communication. We can help you during the design, development, prototyping or mass production of various types of fixed, mobile, and portable two way radios, cellular telephones, GPS units, personal digital assistants (PDAs), smart and remote control equipment and wireless networking devices and instruments.
Contact us to take advantage of our fully integrated, configurable Wireless RF Transmitter, Receiver & Transceiver Modules, High Frequency RF Devices, and most importantly of our consulting services regarding the implementation and application of these wireless components and devices and our engineering integration services. We can make you realize your new product development cycle by assisting you at every phase of the process, from concept to design to prototyping to first article manufacturing to mass production.
• Some applications of wireless technology we can help you with are:
- Wireless security systems
- Remote control of consumer electronic devices or commercial equipment.
- Cellular telephony (phones and modems):
- Wireless energy transfer
- Radio communication devices
- Short-range point-to-point communication devices such as wireless microphones, remote controls, IrDA, RFID (Radio Frequency Identification), Wireless USB, DSRC (Dedicated Short Range Communications), EnOcean, Near Field Communication, Wireless Sensor Networks : ZigBee, EnOcean; Personal area networks, Bluetooth, Ultra-wideband, wireless computer networks: Wireless Local Area Networks (WLAN), Wireless Metropolitan Area Networks (WMAN)...etc.
Microwave electronics including silicon microwave diodes, dot touch diodes, schottky diodes, PIN diodes, varactor diodes, step recovery diodes, microwave integrated circuits, splitters/combiners, mixers, directional couplers, detectors, I/Q modulators, filters, fixed attenuators, RF transformers, simulation phase shifters, LNA, PA, switches, attenuators, and limiters. We also custom manufacture microwave subassemblies and assemblies according to users' requirements.
Microwaves are electromagnetic waves with wavelengths ranging from 1 mm to 1 m, or frequencies between 0.3 GHz and 300 GHz.The microwave range includes ultra-high frequency (UHF) (0.3–3 GHz), super high frequency (SHF) (3–30 GHz), and extremely high frequency (EHF) (30–300 GHz) signals.
Uses of microwave technology:
Before the invention of fiber optic transmission technology, most long distance telephone calls were carried via microwave point-to-point links through sites like the AT&T Long Lines. Starting in the early 1950s, frequency division multiplexing was used to send up to 5,400 telephone channels on each microwave radio channel, with as many as ten radio channels combined into one antenna for the hop to the next site, that was up to 70 km away.
Wireless LAN protocols, such as Bluetooth and the IEEE 802.11 specifications, also use microwaves in the 2.4 GHz ISM band, although 802.11a uses ISM band and U-NII frequencies in the 5 GHz range. Licensed long-range (up to about 25 km) Wireless Internet Access services can be found in many countries in the 3.5–4.0 GHz range (not in the USA however).
Metropolitan Area Networks: MAN protocols, such as WiMAX (Worldwide Interoperability for Microwave Access) based in the IEEE 802.16 specification. The IEEE 802.16 specification was designed to operate between 2 to 11 GHz frequencies. The commercial implementations are in the 2.3GHz, 2.5 GHz, 3.5 GHz and 5.8 GHz frequency ranges.
Wide Area Mobile Broadband Wireless Access: MBWA protocols based on standards specifications such as IEEE 802.20 or ATIS/ANSI HC-SDMA (e.g. iBurst) are designed to operate between 1.6 and 2.3 GHz to give mobility and in-building penetration characteristics similar to mobile phones but with much much greater spectral efficiency.
Some of the lower microwave frequency spectrum is used on Cable TV and Internet access on coaxial cable as well as broadcast television. Also some mobile phone networks, like GSM, also use lower microwave frequencies.
Microwave radio is used in broadcasting and telecommunication transmissions because, due to their short wavelength, highly directive antennas are smaller and therefore more practical than they would be at lower frequencies (longer wavelengths). There is also more bandwidth in the microwave spectrum than in the rest of the radio spectrum; the usable bandwidth below 300 MHz is less than 300 MHz while many GHz can be used above 300 MHz. Typically, microwaves are used in television news to transmit a signal from a remote location to a television station in a specially equipped van.
The C, X, Ka, or Ku Bands of the microwave spectrum are used in the operation of most satellite communications systems. These frequencies allow large bandwidth while avoiding the crowded UHF frequencies and staying below the atmospheric absorption of EHF frequencies. Satellite TV either operates in the C band for the traditional large dish Fixed Satellite Service or Ku band for Direct Broadcast Satellite. Military communication systems run primarily over X or Ku Band links, with Ka band being used for Milstar.
Radars use microwave frequency radiation to detect the range, speed, and other characteristics of remote objects. Radars are widely used for applications including air traffic control, navigation of ships, and traffic speed limit control.
Besides ultrasonic decices, sometimes Gunn diode oscillators and waveguides are used as motion detectors for automatic door openers. Much of radio astronomy uses microwave technology.
Global Navigation Satellite Systems (GNSS) including the American Global Positioning System (GPS), the Chinese Beidou and the Russian GLONASS broadcast navigational signals in various bands between about 1.2 GHz and 1.6 GHz.
A microwave oven passes (non-ionizing) microwave radiation (at a frequency near 2.45 GHz) through food, causing dielectric heating by absorption of energy in the water, fats and sugar contained in the food. Microwave ovens became common following development of inexpensive cavity magnetrons.
Microwave heating is widely used in industrial processes for drying and curing products.
Many semiconductor processing techniques use microwaves to generate plasma for purposes such as reactive ion etching (RIE) and plasma-enhanced chemical vapor deposition (PECVD).
Microwaves can be used to transmit power over long distances. NASA worked in the 1970s and early 1980s to research the possibilities of using Solar Power Satellite (SPS) systems with large solar arrays that would beam power down to the Earth's surface via microwaves.
Some light weaponry uses millimeter waves to heat a thin layer of human skin to an intolerable temperature to make the targeted person move away. A two-second burst of the 95 GHz focused beam heats the skin to a temperature of 130 °F (54 °C) at a depth of 1/64th of an inch (0.4 mm). The United States Air Force and Marines use this type of Active Denial System.
If you already know exactly the product make, model, code, part number ....etc. or at least the specifications of the items you would like to order or if you need custom manufacturing according to your specifications, please click highlighted text below:
GO TO OUR REQUEST A QUOTE PAGE
AGS-Electronics’s worldwide design and channel partner network provides a channel between our authorized design partners and our customers in need of technical expertise and cost-effective solutions in a timely manner. Download brochure for our DESIGN PARTNERSHIP PROGRAM
If you don't have a specific product brand, model, code....etc. in mind but would like to search for something that may suit your needs, we invite you to download the brochures and catalogs below for some of the off-shelf products available: OFF-SHELF WIRELESS & RF & MICROWAVE
AGS-Electronics is your Global Supplier of Electronics, Prototyping House, Mass Producer, Custom Manufacturer, Engineering Integrator, Consolidator, Outsourcing and Contract Manufacturing Partner